Our website is in the process of being redesigned. Please call us for assistance or to place an order.

Thank you!



Our website is in the process of being redesigned. Please call us for assistance or to place an order.

Thank you!


Questions? Call Today
503.674.2744

PLASMA CUTTER COMPRESSED AIR DRYER .03 MICRON COALESCING MILLER LINCOLN HOBART

SKU: 281102619548
$295.00
excluding shipping

COMPRESSED AIR DRYER
WITH .03 MICRON
COALESCING AFTER FILTER




MINIATURE COALESCING FILTER



This .03 micron coalescing after filter takes out any oil vapor to deliver clean oil free air.

LAMAN EXTRACTOR/DRYER
HOW IT WORKS
  • Compressed air containing tiny particles of dirt, dust, oil, rust and moisture enters the first stage of the La-Man® Extractor/Dryer Filter.

  • A coalescing effect occurs as air passes through a cartridge mesh filter, which captures larger particles and causes moisture to form larger droplets.

  • Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture to condense on the honeycomb.

  • Particle-laden liquid flows along the bottom and out the drain.

  • Air passes through the second stage wire supported fiber filter cartridge, which captures remaining particles down to 5 microns (smaller microns available).

  • Remaining moisture and contaminants are dried and filtered in the second stage filter.

  • Exhaust air is clean and dry – no dirt, rust, oil, or moisture. This air then goes through the final stage through the .03 micron coalescing after filter to ensure oil free air.
  • PART: F5005-02

    This filter water extractor dryer will give super dry, oil free air for plasma cutters and paint applications.

    This unique set-up comes with inlet regulator, oil/water extractor and .03 micron coalescing after filter. This compressed air dryer gives you super clean, oil free, dry air.

    Pipe thread is female 1/4" in/out.


    LA-MAN OIL/WATER EXTRACTOR DRYER


    See description of extractor dryer below.